Evaporative Cooling Fabric for Dog Vests
A 3-layer cooling mesh fabric for dog cooling vests. Pour water on the outside, the 3D spacer core holds it, and evaporation carries heat away for hours, while the inner layer keeps the dog's coat dry.
3 layers
Wick · Store · Stay dry
−3.5°C
Inner surface vs. dry vest*
Dry touch
One-way inner layer
Pantone
Custom color matching
How it works
One Splash of Water, Three Layers Working Together
Dogs cool themselves mainly by panting. This fabric adds a second cooling route: water stored in the vest evaporates slowly and pulls heat away from the body.
1
Outer Mesh
Open, highly breathable mesh. Water poured on top passes through instantly instead of beading or running off.
2
3D Spacer Core
The water reservoir. The 3D spacer structure holds moisture inside the fabric and releases it slowly as vapor.
3
One-Way Inner Layer
Moves moisture outward but resists water passing inward, so the dog's coat stays dry and the inside feels dry to the touch.
The cooling cycle: wet the vest → water is stored in the core → evaporation draws heat away → re-wet when dry.
Fabric details
Engineered Layer by Layer
Each layer is a separate knitted 3D spacer mesh fabric from our own production line. Use the full 3-layer system, or source individual layers for your own construction.
FZ08-J · OUTER
Fast-Wicking Outer Mesh
✓ Water passes through instantly
✓ High air permeability
✓ Clean, durable surface for printing and trims
S015 · CORE
3D Spacer Water Reservoir
✓ Holds water inside the spacer structure
✓ Slow, steady evaporation
✓ Cushioned, keeps the vest off the body
FZ20-P · INNER
One-Way Moisture Inner Layer
✓ Resists water moving inward
✓ Coat stays dry, inside feels dry
✓ Soft hand against fur and skin
Specifications
Material Specifications
Typical values, subject to normal production tolerance. Click a fabric code for its full product page.
FZ08-J · Outer
S015 · Core
FZ20-P · Inner
Function
Fast water pass-through, breathability
Water storage, slow evaporation
One-way moisture, dry touch
Structure
3D air mesh / spacer mesh
3D spacer mesh
Spacer mesh, one-way moisture
Composition
100% Polyester
70% Nylon / 30% Polyester
57% Polypropylene / 43% Polyester
Weight
165 gsm
120 gsm
180 gsm
Thickness
1.85 mm
Approx. 2.5 mm
Approx. 1.1 mm
Width
150 cm
150 cm
150 cm
Certification
GRS, OEKO-TEX
GRS, OEKO-TEX
GRS, OEKO-TEX, ISO 10993
Product page
Real tests, no renders
See It Work
Both videos were filmed in our sample room with production fabric.
Test 1 · Wicks Through, Stays Dry Inside
1. Water poured on the outer mesh soaks straight in.
2. The fabric is lifted: water stays in the core instead of dripping.
3. The paper tissue underneath stays dry.
4. Reversed, water poured on the inner side passes through slowly, proving one-way transfer.
5. Dry-ice vapor flows through all three layers: full breathability.
Test 2 · Measurably Cooler
Two vests sat side by side in the sun: one wetted with room-temperature water, one left dry. We then measured the inner layer, the side that touches the dog, with an infrared thermometer.
27.6°C
Dry vest, inner layer
24.1°C
Wet vest, inner layer
Result: 3.5°C cooler, and the inner layer still feels dry.
*In-house test, single measurement. Results vary with temperature, humidity and airflow.
For the dog owner
As Simple as a Splash of Water
No freezer, no ice packs, no batteries. A tap, a hose or a water bottle on the trail is all it takes.
1
Wet the vest
Soak it in water or pour water over the outside until the core is full.
2
Put it on
Give it a light squeeze and fasten it on the dog. The inner layer stays dry against the coat.
3
Re-wet when dry
When the outside feels dry, splash it again and the cooling cycle restarts.
Comparison
How It Compares to Other Cooling Vests
A general comparison of common cooling methods for dog vests. Actual performance depends on the specific product and conditions.
Ice pack / gel vest
Single-layer wet vest
ZFY 3-layer fabric
How it cools
Cold packs against the body
Evaporation from one wet layer
Evaporation from a water-storing 3D core
Needs a freezer
Yes
No
No
Dog's coat stays dry
Usually, but condensation can form
Often gets wet
Yes, one-way inner layer
Water held per wetting
Not applicable
Low, thin single layer
High, 3D spacer reservoir
Breathability
Low, packs block airflow
Good
High, all three layers are open mesh
Weight on the dog
Heavier, extra packs
Light
Light
Applications
Built for Hot-Weather Adventures
Hiking, running, beach days and summer walks. Fits dogs of every size, from small breeds to large working dogs.
Illustrative images.
From fabric to finished product
Your Brand, Your Colors
Fabric Rolls or Finished Vests
Buy the three fabrics by the roll for your own sewing line, or let us produce the finished vest to your pattern and size range.
Illustrative images.
Custom Color Matching
Send a Pantone code or a physical swatch and we will dye the outer mesh to match your brand palette, with lab dips approved before production.
Work with us
Start Your Pet Cooling Project
This is a new fabric system, and we are looking for pet brands to develop it with. Whether you are a dog cooling vest manufacturer sourcing wholesale cooling fabric or a brand that needs finished vests, it starts with a conversation.
1
Tell us your project
Your product, target market and dog sizes, and whether you need fabric rolls or finished vests.
2
Get a free swatch kit
Swatches of FZ08-J, S015 and FZ20-P plus a specification sheet, so you can run your own tests.
3
Co-develop with us
Color, weight and structure can be tuned to your product. Small trial runs are discussed case by case.
Why ZFY
Factory-Direct 3D Mesh Specialist
Own Knitting Lines
All three layers are knitted in-house, so quality and lead times stay under our control.
Open to Co-Development
Weight, color and structure can be adjusted to fit your product and target market.
Free Samples
Swatches of all three fabrics are available for your own testing and product development.
One-Stop Supply
Wholesale cooling fabric by the roll and finished vest production from a single partner.
Frequently Asked Questions
Will the dog's coat get wet?
No. The FZ20-P inner layer is a one-way moisture fabric: water stays in the outer and core layers, and the inside of the vest feels dry to the touch.
How is this different from other cooling fabrics?
Many cooling fabrics rely on a cool-touch finish that only feels cold for a moment. This system cools by evaporation: the S015 3D spacer core stores water and releases it slowly, so the cooling keeps working while the inner layer stays dry against the dog.
How does a dog cooling vest made with this fabric work?
Water poured on the vest passes through the outer mesh and is held in the spacer core. As it evaporates it absorbs heat, which is drawn away from the dog's body. The one-way inner layer stops the water from soaking the coat.
How does the dog owner use it?
Soak or pour water over the vest, put it on the dog, and re-wet it when it feels dry. No freezer and no ice packs needed.
How long does the cooling last?
It depends on air temperature, humidity, sun and wind. Evaporation continues as long as the core holds water. In hot, dry conditions it evaporates faster, so it cools harder and needs re-wetting sooner.
Can I buy only one of the layers?
Yes. FZ08-J, S015 and FZ20-P can be supplied individually or together as a matched 3-layer set.
Can you make finished vests under my brand?
Yes. Send your design or tech pack and we will quote both fabric-only and finished-product options.
How do I get samples?
Contact us with your application and target market, and we will send fabric swatches plus a specification sheet.
Develop Your Next Cooling Vest with Us
Get free swatches of the 3-layer system and a full specification sheet for your product team.