ZFY TECHNICAL TEXTILES · FACTORY-DIRECT ROLLS
3D Filter Mesh Fabric. Engineered to Outlast Cotton & Paper.
Wholesale 100% polyester warp-knitted 3D spacer mesh fabric (250–650 GSM, 2.5–6.5 mm) supplied by the roll. Built as the washable, non-collapsing alternative to mold-prone paper humidifier wicks and loose non-woven filter batting—for washable humidifier filters, rigid water filtration mesh, reusable air filter mesh fabric, and aquarium pad rolls.




XS08 (Humidifier) · K420 (Water) · K612 (AC) · YH-G-300 (Aquarium)
250 – 650 GSM
4 Engineered Polyester Models
2.5 – 6.5 mm
3D Monofilament Depth
1.0 – 3.0 m
Custom Width on XS08
1 Roll (40m)
Factory-Direct Wholesale MOQ
01 / APPLICATION-MATCHED MODELS
Four 3D Filter Mesh Fabrics. Built for Distinct Fluid Loads.
Each 100% polyester 3D spacer fabric below is engineered for a specific filtration environment—with transparent engineering notes so your R&D team can sample with confidence.

EVAPORATIVE HUMIDIFIER · TOP PICK
XS08 — Anti-Mold Washable Humidifier Filter Mesh
650 GSM · 6.5 mm · Width 1.55m / 1.90m (Custom 1–3m) · White / Grey / Black
Built as a reusable humidifier filter and humidifier wick material to replace mold-prone paper wicks. Open 6.5 mm 3D diamond channels drain and dry rapidly while supporting repeated washing.
Engineering note: In-stock yarn-dyed White, Grey & Black only (no post-dyeing; other colors require high yarn MOQ). Allow normal knitted width tolerance.

WASTEWATER & WATER FILTRATION
K420 — Rigid Anti-Collapse Water Filtration Mesh
390 GSM (390–410g) · 2.7 mm · Width 1.60 m · Imported RD Machine
High-stiffness water filter mesh and structural polyester filter cloth (water filter cloth). Flat, dense surface resists deformation under continuous hydraulic pressure during wastewater impurity screening.
Engineering note: 100% polyester is for neutral water only (not corrosion-resistant against strong acids/alkalis). Verify flow resistance with a swatch.

AC & HVAC PRE-FILTER MEDIA
K612 — Washable Ribbed Air Conditioner Filter Mesh
250 GSM · 3.0 mm · Width 1.60 m · Washable & Reusable
3.0 mm vertical ribbed cut to fit air filter material and washable air filter material for air conditioner filter mesh intakes. Rinsable pre-filter layer ahead of pleated HVAC filter media.
Engineering note: Higher airflow resistance than flat single-layer screens. Test sample yardage on your AC/blower unit to verify pressure drop and stability.

AQUARIUM & POND OEM ROLLS
YH-G-300 — Honeycomb Aquarium Filter Pad Roll
300 GSM · 2.5 mm · Width 1.50 m · Zero Fiber Shedding
Hexagonal honeycomb aquarium filter pad roll and pond filter media supplied in 1.50 m rolls for die-cutting converters. Traps fish waste and suspended debris cleanly without shedding loose fibers.
Engineering note: Fine honeycomb pores clog over time; rinsable for a few cycles depending on water load, designed for periodic replacement rather than indefinite reuse.
02 / SPECIFICATION MATRIX & MATERIAL COMPARISON
Compare Specifications & Why 3D Mesh Replaces Filter Cotton
Evaluate our four 3D spacer mesh fabric models side by side, and see where warp-knitted filter media rolls outperform conventional non-woven HVAC filter media, air filter media rolls, and paper humidifier wicks.
| Model | Application | Weight / Thick | Roll Width | Washability | Key Engineering Boundary |
|---|---|---|---|---|---|
| XS08 | Humidifier anti-mold wick | 650 GSM / 6.5 mm | 1.55m / 1.90m (Custom 1–3m) | Fully washable & reusable | White / Grey / Black yarn-dyed only; natural knitted elasticity. |
| K420 | Wastewater & rigid water support | 390 GSM / 2.7 mm | 1.60 m | Cleanable structural layer | Neutral water only (not corrosion-resistant); moderate flow resistance. |
| K612 | AC / HVAC washable pre-filter | 250 GSM / 3.0 mm | 1.60 m | Fully washable & reusable | Higher airflow resistance than flat screens; test pressure drop first. |
| YH-G-300 | Aquarium & pond debris pad | 300 GSM / 2.5 mm | 1.50 m | Rinsable a few times | Honeycomb pores clog over time; periodic replacement recommended. |
3D Filter Mesh Fabric vs. Traditional Non-Woven Filter Cotton & Paper Wicks
| Performance Factor | ZFY 3D Filter Mesh Fabric | Non-Woven HVAC / Air Filter Media Rolls | Cellulose Paper Humidifier Wicks |
|---|---|---|---|
| Anti-Collapse Support | Maintains 3D channels via vertical PET monofilament pillars (K420 / XS08). | Compresses and flattens when wet or loaded. | Softens and sags rapidly once saturated. |
| Mold & Drying Speed | Quick-drying open spacing inhibits mildew and odor (XS08). | Traps dampness inside dense fiber clumps. | Breeds mold and slime within weeks. |
| Fiber Shedding | Zero loose fiber shedding; clean die-cut edges. | Sheds loose fibers into pumps and airways. | Tears easily; strictly single-use. |
03 / FACTORY-DIRECT MANUFACTURING
Knitted & Packed for Global OEM Supply.
Operating imported RD, 298-series, and 286-series warp-knitting lines in Changshu, Jiangsu (near Shanghai Port), ZFY ships wholesale filter mesh fabric rolls directly to appliance OEMs and filter die-cutters.
- 1-Roll MOQ (approx. 40 m): Start pilot testing with low inventory risk.
- Custom Roll Widths: Proven 1.55 m & 1.90 m runs on XS08 (customizable 1–3 m).
- Strict Roll Inspection: GSM, thickness caliper, and protective export poly-wrapping.

On the production floor
Direct warp-knitting and roll inspection in Changshu.

Export-packed fabric rolls
Moisture-resistant poly-wrapping with clear lot markings.
04 / ENGINEER & SOURCING FAQ
Frequently Asked Questions
Traditional non-woven HVAC filter media and air filter media rolls are made of loosely bonded staple fibers that flatten when wet, trap stagnant moisture, and shed fibers. ZFY’s 3D spacer mesh fabric is warp-knitted from continuous 100% polyester filaments with vertical monofilament pillars—delivering anti-collapse support, fast drying, zero fiber shedding, and washable durability.
XS08 (650 GSM washable humidifier filter) and K612 (250 GSM washable air filter material) are designed for repeated washing and reuse. YH-G-300 (300 GSM aquarium filter pad roll) can be rinsed and reused a few times depending on water load, but because its fine honeycomb pores trap debris tightly, periodic replacement is recommended.
We have produced XS08 in both 1.55 m and 1.90 m widths and can customize roll width within 1.0 m – 3.0 m (allow normal width tolerance due to knitted elasticity). Colors include White, Grey, and Black using in-stock yarn-dyed yarns; post-dyeing is not possible and other custom colors are not recommended due to high yarn MOQs.
For K612 (3.0 mm air conditioner filter mesh), airflow resistance is higher than a thin single-layer nylon screen, so we recommend testing a 1–2 meter sample on your blower to verify pressure drop and long-term stability. For K420 (390 GSM water filtration mesh / polyester filter cloth), 100% polyester is suited for neutral wastewater screening and support layers, not strong acids or alkalis.
We are a B2B factory supplying wholesale fabric by the roll with a standard MOQ of 1 roll (approx. 40 meters). We supply full rolls, custom widths, and free A4 sample swatches to filter brands, humidifier OEMs, and die-cutting converters worldwide.
START WITH PHYSICAL SWATCHES
Request Your 4-Model Filter Mesh Swatch Kit & Roll Quote
Test wicking speed, stiffness, and airflow pressure drop directly on your equipment before committing to production rolls.
- Free 4-Model Swatch Kit: XS08, K420, K612 & YH-G-300
- 1–5 Meter R&D Trial Yardage Available
- MOQ 1 Roll (40m) · Direct Export from Changshu
Direct Factory Desk:
Changshu, Jiangsu, China · [email protected]
Send Your Filtration Inquiry
Tell us your target model, roll width, and estimated quantity. We reply within 24 hours.